Trying to deal with solar power without knowing how many watts for solar powered shed needs? Knowing the exact watts helps you to make your solar project enjoyable. Yes, be green, and run your shed perfectly.
A solar-powered shed works when it gets the power that it needs. Estimating the power depends on which types of devices and equipment you want to run through it.
All you need is some stats. This information is curiously hard to find but not impossible. Estimating the right watt keeps you away from unwanted power outage situations.
Let’s get more information about it and make your life full of green power.
Why Does Watt Matter To Install Solar Power Shed?
Having a power shed means you are free from lots of things. Yes, it’s a system that can power your daily life even in remote areas where getting power through cable is tough.
When you know how many watts of solar powered shed you need that means without using undergoing cables, you’ll get power in the most economical way. In this situation, considering a solar power shad with perfect watts is a wise decision.
It’s not expensive but it needs some electrical knowledge. There are different parameters like Watt, Amp, Volt, etc. to specify the exact requirement of power.
Read More: Goal Zero Solar Panel Review
Watt, Amp, and Volt? Why Do You Need To Know them?
Getting and installing a basic solar power shed is not the last thing. The reality you will face when you want to use some heavy appliances. Maybe the shed can’t provide such power.
So, you need more power. But how did you miscalculate the power? That’s why you need to get some electrical knowledge. There are three things you need to know and these are to find out how many watts you need.
Watts defines the unit used to measure electrical power. Amps are for electrical flow rate (current). Last, Volts defines power (pressure). That means more or higher voltage for more electrical current flows.
Let’s Find Out how watts are measured in terms of Voltage and amps. It has the formula to find the exact figure and that is.
Watts = Voltage * amps
For the small appliance, you can use a 160-watt solar panel. If needed, use two of them. Along with that, use a 200 AH battery. You also need an amp regulator and watt inverter. With this setup, some appliances can be used easily and some are not.
If you are using a 600-watt inverter with this 160-watt setup that means you can’t use an appliance over 600 watts. Because the inverter has the capacity to handle power under 600 watts.
Using a 20 amp regulator never lets you use an appliance that burns more amps than it can deal. One more thing, you also need to count and it’s the power of the battery. It also has the limitation to store power.
To keep the battery healthy perfect you can’t use all of its capacity. When the shed is not getting the sunlight, don’t use all the power of the batter. Because it will run down fast. With 160 watts of power, it’s easy to use different types of small appliances, especially those which are under 50 watts.
Read More: Best Solar Panels For Cloudy Days
What Can We Use and What Not?
Solar power shed is not to power everything. It has a limitation on the basis of its setup and capabilities to supply power. Here is a list of runnable appliances through the solar shed.
- CD Player & DVD player
- Laptop & Desktop computer
- LED lights & Normal Lights
- Standing Lamps
- Mobile phones charger and power sander battery charger
- Electric razor
- Small refrigerator
- CPAP machine, etc.
There are lots of home appliances you might try to run using a solar shed. You can’t use an air conditioner, kettle, toaster, electric hob, washing machine, large refrigerator, freezer, iron, blender, curling tong and hair straighteners, cappuccino machine, waffle maker, vacuum cleaner, dishwasher, hairdryer, etc.
Don’t Use Much Power:
Using a solar-powered shed is obviously a good way to go green. It hassles free to set and use. But using excessive power never gives you the expected result for power.
Sometimes it causes electrical hazards or technical problems. So, don’t use much power. Here is a basic example of how you do that.
If you want to use light appliances like lights and radio, then you need a 50-watt kit, a 12 v deep cycle battery, and a 100-watt inverter, that’s all. This setup also lets you power your small gadgets like mobile phones and small lights.
What do We need To Install A Solar Powered Shed?
Installing a new solar power shade needs a prerequisite. For the basic setup, you can follow some steps. Let the shed size is 18 x 8. Then set a solar panel kit at a high level. You need some components for that. All these are given below.
- Collect a 100 Watt solar panel. Ensure that it has an MPPT Charge controller.
- Collect a Power Inverter. The inverter should be capable of handling 600-800 watts.
- Collect a deep cycle marine battery. Get one or two of them.
This minimalistic setup has got enough wattage to fulfill your requirement for mini home appliances.
What Are The Basic Solar Power Equipment?
To set a solar shed with efficient power you need four main parts. And these are
- Fuse Box
Let’s know more about how it works and why we need it.
- You need a Solar panel that sucks energy from the sun.
- Batteries are for storing all the power absorbed by the solar panel. For the basic and small home appliances, you can get a deep cycle battery.
- The regulator works as a controller. It’s to control the battery charging capacity. Remember, the optimum limit is 14V.
- Batteries may have much power to store but it pumps out the power at 12v. So, the inverter works as a converter to convert 12v suitable for appliances.
Is A Small Solar-Powered Shed With Minimum Watt worth It?
The answer depends on what you need. If you don’t need much power to run your appliances then it’s perfect for use. To solve the simple power issue, these types of systems are suitable.
Required more power from your system? Then it’s easy to upgrade by adding some extra components. Even it will help you to heat the water of your above ground pool! Yes, you heard right.
When you know how to install solar heater for above ground pool and how to attach it with a solar power shed then it’s going to be easy for you. Want to know how to do it?
You might want to read the instructions below-
Heating a pool using a solar heater is easy. Because a pool has a pump, controller, PVC pipe, and many other necessary components. All these things make the installation of a solar heater easy.
Just pick the PVC line and make a route into the flex hoses. Flex hoses are connected to a solar panel. In the above-ground pool, lay them out on the ground.
After closing the valve, the water will get hot. Because it will go right through the solar collector panel. To control how much heat you want in your pool, control the water flow using the valve. Open the valve. It will let less water flow.
Read More: Best solar Generator For Camping
Answer: It depends on the available space on your roof. The 15 square foot solar panel is the standard size to install. In a small shed, only a few of them can be installed. Depending on the panels, it will power a shed.
Answer: To get 1000 watts from the solar panel, you just need to use five solar panels of 200 watts. If you use a solar panel of 100 watts, you need 10 of them.
In general, most of the outlets operate at 12o volts but for the larger and power-consuming appliances, it needs 240 volts. For the 240 volts, you must use different panels, tires, and sub-panel as well.
Yes, you can do it. But this type of extension is used as a temporary solution. The better option is using an extension cord for single circuits and keeping it unplugged when it is not in use.
Using a Solar panel on your shed offers different types of benefits. But the mentionable one is, it’s eco-friendly and it’s renewable.
Getting some basic information about the electricity helps a lot to determine how many watts of solar powered shed need and how to install it. Installing a solar power shed is not the last thing to get power.
Getting adequate power is the key that makes the user of solar power shed happy. From this guideline, you have already got how to measure the watt and what appliances you can run under your estimated watt.
Gather all the components of the solar power shed according to your estimated watt and install it. Now test it, and get enough power when there is no sun for a while. Enjoy your day being off-grid!